Roller Conveyor 2 Ends Shaft Milling Machine 2700mm Length High Precision

• After-sales Service: After Sales Support
• Warranty: 3 Year
• Type: Horizontal Lathe
• Processing Accessory: Centre CNC Lathe
• Guide Rail: Inclined Guide Rail
• Tool Holder: Double-tool Holder CNC Lathe
• Model NO.: QZ11
• Power Source: Hydraulic Pressure
• Controlling Mode: CNC
• Automatic Grade: Semiautomatic
• Setting Mode: Floor-type
• Precision: High Precision
• Certification: GS, CE, RoHS, ISO 9001
• Condition: New
• Pipe Length: 2600mm
• Pipe Dia: 40mm
• Transport Package: Steel Package
• Specification: XZ36-6X230
• Trademark: China-Techpart
• Origin: China
• HS Code: 8483300090
• Production Capacity: 200 Sets/Year

Product Description

roller conveyor 2 ends shaft milling machine 2700mm length high precision

parameter:
 

specification	XZ36-6×230	XZ36-6×270
Speed for spindle	500,700,900r/min	500,700,900r/min
Diameter of roller shaft processed	Φ18~Φ60mm	Φ18~Φ60mm
Length of roller shaft processed	200~2300mm	200~2700mm
Processing shaft groove width	6~45mm	6~45mm
Cutting depth	0~5mm	0~5mm
Spindle motor	3kW×2(SET)	3kW×2(SET)
Oil pump motor	5.5kW	5.5kW
Hydraulic system Working pressure	1.5~4MPa	1.5~4MPa
Hydraulic System Flow	31L/min	31L/min
Cooling bump motor	125W×2	125W×2
Equipment size	4050mm×1300mm×1600mm	4450mm×1300mm×1600mm

 
main performance

A.it's a automatic machine to produce the oblate slot of the both sides 

   through clamping the roller carrier shaft which used in the conveyor roller.

B.There are four spindle boxes in the machine,and each spindle

   box spindle box spinning processing with one milling cutter.

C.Suitable environment temperature:0-40ºC

D.No corrosive medium and dust occasion


Main performance and application 
This machine is an automatic equipment which could process the two ends of the belt conveyor roller shaft by a single clamping, which could meet the requirements of the processing of roller shaft produced both at domestic or abroad.
Because every roller shaft has four grooves, the machine has four spindle boxes, a milling cutter is drove by a spindle box to process a groove.
Workpieces are clamped pm the V-shaped iron by hydraulic. Droved by hydraulic, the four spindle boxes move up and down when processing, to realize fast forward, work into (cutting) and fast backward. The electronic control system applied imported programmable controller (PLC) as the center for process control, which with high degree of automation, high efficiency and reliability. It's suitable for volume production of roller shaft.